Motion-SPM™ in DIP

Contents Product Offering | Features | Application Circuit Example | Application Notes | Test Board | Package | SPM® Home

The Motion-SPMs in DIP provide complete adjustable-speed motor drive control and fully-integrated circuit protection for ac motors found in appliance applications such as washing machines and air conditioners. Compared to discrete IGBT solutions, the integrated SPM® requires less than half the board space, while providing low-voltage control and high-voltage output stage rated at 10~30A at 220Vac. This Motion-SPM™ series comes in a small (60 x 31mm), ceramic-based transfer molded-type package that optimizes heat transfer from the IGBTs, achieving a 27% higher power rating than a conventional TO-220F package

Product Offering

Products	BVCES (V)	Ic (A)	Switching Frequency (kHz)	Motor Rating (kW)	Substrate
FSAM10SM60A	600	10	5	1	Ceramic
FSAM10SH60A	600	10	15	1	Ceramic
FSAM15SM60A	600	15	5	1.5	Ceramic
FSAM15SH60A	600	15	15	1.5	Ceramic
FSAM20SM60A	600	20	5	2	Ceramic
FSAM20SH60A	600	20	15	2	Ceramic
FSAM30SM60A	600	30	5	3	Ceramic
FSAM30SH60A	600	30	15	3	Ceramic
FSAM50SM60A	600	50	5	5.0	DBC
FSAM75SM60A	600	75	5	7.5	DBC

Features • Built - in thermistor for temperature monitoring • Adjustable short - circuit current protection using low - side Sense -IGBTs • Divided negative DC - link terminals for inverter current sensing applications • Switching frequency up to 20kHz • Single-grounded power supply and opto-coupler-less interface due to built-in HVIC • Inverter power rating covering up to 7.0kW at 200Vac input with single package • Optimized IGBTs for low and high switching applications respectively • Isolation voltage rating of 2500Vrms/min • Very low thermal resistance due to ceramic and DBC substrate

Application Circuit Diagram